How to repair your washer-type faucet
Shower with washer diagram
Step-by-step
  • Turn off water supply. Next, drain lines by turning on faucet handles.
  • Remove cap and then remove screws holding handles to stems and pry handle off (you may need to use a faucet puller if handle is corroded.)
  • Wrap tape around flange and, using pliers, turn counter clockwise to remove. Remove the flange nipple in the same manner.
  • After removing flange and nipple, stem and bonnet can be removed by using shower socket.
  • Remove packing nut from bonnet. Remove packing from inside the bonnet and replace.
  • Replace stem washer at the bottom of the stem.
  • Use a faucet seat tool to remove and replace faucet seat. Reassemble the valve and turn water on.
Tools you'll need
  • Screwdriver
  • Faucet puller
  • Masking tape
  • Pliers
  • Shower socket
  • Faucet seat tool
Shower socket diagram

For a more complete faucet repair guide, see your local plumbing store or home improvement center.

Questions?

Contact EWEB's Water Management Services Department at (541) 685-7000 or e-mail EWEB Water Management Services for more information.