How to repair your ball-type faucet
Ball-type faucet diagram
Step-by-step
  • Turn off water supply. Drain lines by turning on faucet handle.
  • For lever-style handles, locate and loosen screw holding handle, then carefully pry handle off stem or use a faucet handle puller. For round-style handles, remove the decorative cap to locate screw.
  • Cover the cap with tape to protect the finish. Using pliers, unscrew counter-clockwise.
  • Lift out cam assembly and ball.
  • Using a pencil or sharp tool, lift out seats and springs.
  • Check all parts for wear and damage. Replace where necessary.
  • When reassembling, be sure that slot in ball slips into pin in valve body and that lug on cam assembly slides into slot on valve body.
  • Screw cap on clockwise and replace handle. Tighten cap further if leaks develop right after repair.
Tools you'll need
  • Screwdriver
  • Pliers
  • Pencil or sharp tool

For a more complete faucet repair guide, see your local plumbing store or home improvement center.

Questions?

Contact EWEB's Water Management Services Department at (541) 685-7000 or e-mail EWEB Water Management Services for more information.